Easy and direct (cold applied) application, no preheating required. Provides an impervious waterproofing membrane that protects the concrete structure and brick foundations against. Chloride and sulphate ions are present in soils and water. Corrosion-resistant and vapor barrier

Useful as a protective coating on concrete and brick foundations, retaining walls, timber, metals, etc. Provides a sandwich membrane in new construction and surface treatment on existing slabs. Damp-proofing of regular surfaces like concrete and asbestos. Provides a key for plaster on difficult surfaces.  For waterproofing and protection of structure, Concrete, columns and beam.

1-1.2 Kg/Sqm in 2 coats or as recommended over a primed surface for best results

PLASTICON BITU COAT  is available in 5 kg. & 25 kg.

PLASTICON BLACK COAT is a single-component modified flexible impermeable waterproof Coating that dries to an elastic flexible, impermeable waterproof coating.

Single, cold-applied, easy-to-use waterproof coating. Good for applying on concrete/masonry. Protects from soil acids/sulphates & chlorides. also works as a vapor barrier.

Useful as a protective coating on concrete and brick foundations, retaining walls, timber, metals, etc... Damp-proofing of structures, and regular surfaces like concrete and asbestos.

1.2 Kg/sqm in 2 Coats for best results.

PLASTICON BLACK COAT is available in 5 kg. & 25 kg.

PLASTICON CURE C is wax based emulsion for retaining water in concrete for effective hydration of cement for curing freshly laid concrete. It is an extremely cost-effective method and also water-saving. It develops a clear film on concrete which retain its moisture and gives waterproofing.

It is used for water retention for effective hydration of cement. It is used where wet curing is not possible. Column, beams and slabs can be cured. It is used for curing of canal linings, dams. It is used for curing concrete pavements, runways, bridges, decks, etc.

PLASTICON CURE C is available in 5 kg. & 25 kg.

DAMP PROOF is a single component, special synthetic resin-based waterproof and heat-reflective coating. Due to its excellent flexibility and thixotropic nature, it is an ideal product for vertical and horizontal surfaces. It is a single-pack, very economical, and pollution-free waterproof coating. DAMP PROOF is a scientific blend of waterproofing polymers as well as heat reflecting additives, which makes DAMP PROOF a completely breathable waterproof membrane that expels excessiveheat too. it has excellent solar insulation capacity.

The life and durability of the structure are increased. Easy application. No mixing or heating is required. Lightweight compared to conventional roofing systems, thereby loading on the roofs is reduced. Provides a seamless and joint-free seal throughout the surface. Lower labor costs due to easy, simple, and quick application, leading to early completion and time-saving. Provides insulation due to solar reflection. Excellent bonding to most building materials.

Waterproofing of roof slabs, terraces, balconies, sunshades, parapet walls, etc. It provides additional waterproofingand protection when used as base and/or intermediate coat in brickbat coba and / or IPS flooring. Waterproofing cum decorating of external plastered walls. Waterproofing of new surfaces as well as for repair of old surfaces, whether previously treated or not.

1-15 Kg/Sqm in 2 Coats or as recommended for best results.

DAMP PROOF is available in 5 kg. & 25 kg.

PLASTICON DPS is a polymer-based liquid for a deep penetrating sealer for treating hollow blocks, bricks, clays &, etc. It is the ideal treatment for unplastered brick or blockwork.

It is used to waterproof all porous surfaces such as hollow blocks, bricks, clays &, etc. It reduces water absorption below 1 %. It is used on porous surfaces which are to be replastered.

PLASTICON CURE C is available in 5 kg. & 25 kg.

PLASICON EASY COATE  can be used as a bonding agent also. PLASICON EASY COATE  is having more than 50 % active ingredients and therefore it is the best cement-based waterproof slurry for coating on concrete and all building surfaces required for waterproofing.

Waterproofing of basements, toilets, terraces, roofs, water tanks, Sloping roofs, wet areas, etc. Suitable for general concrete repairs. It gives excellent bond strength. It can be used for the protection of concrete against corrosion, salt attack, etc.

1 Kg PLASICON EASY COATE  mixed with 2 Ltr. water and 5 Kg of neat cement will cover appx. 4.5 sqm — 5.0 sqm areas in 2coats depending upon the porosity of the surface. 1:2:5 Ratio of mixing.

PLASICON EASY COATE  is available in 5 kg. & 25 kg.

PLASTICON BLOCK COAT is a colorless glossy coating and protective treatment for paver blocks, cement tiles, stone surface & slates and make them waterproof. It also provides a protective barrier on porous surfaces which resists chemical attacks and eliminates dusting.

It is used for treating paver blocks, cement & stone tiles. It is used to create a glossy film on blocks for protection. It is used to resist against oil, grease, and stains. It is used to waterproof and resist against chemical attacks.

PLASTICON BLOCK COAT  is available in 5 kg. & 25 kg.